How to fit your bike at home for comfortable all day riding

Before a cycling adventure, ensure your bike is properly sized for a comfortable and pain-free ride

A good bike fit is essential for long days in the saddle and, as we all know, a comfortable rider is a happy rider that can go further, longer and most probably faster.

In this article we highlight the 6 steps to fit your bike at home and offer practical solutions for common pain points. The steps work for road, gravel and mountain bike. Remember the fit is what works for you, for what your most happy riding.

1. Step 1: Adjust the seatpost height
2. Step 2: Adjust cleats on your shoes
3. Step 3: Adjust your saddle position
4. Step 4: Set your suspension
5. Step 5: Get the right stem length
6. Step 6: Check your handlebar height, width and angle

Practical solutions for common bike pain points

1. How to stop tingling hands and numb wrists
2. Banishing lower back pain
3. Easing knee pain
4. Comfort your bum
5. Alleviating shoulder pain
6. Preventing flared legs

Step 1: Adjust the seatpost height

Adjust the seat post height so your leg has a slight bend at the lowest 6 o'clock position.

Step 2: Adjust cleats on your shoes

Good cycling shoes are the singular most important aspect of riding comfort. If you've got shoes with cleats the two adjustments are the fore/aft position and the anuglar position.

Fore/aft
Adjust the cleats on your shoe backwards and forwards so the balls of your feet rest over the centre of the axle of the pedal. It's easy to check by looking down at your feet when you are in the 3 o'clock position.

Angular
Change the angle of the cleat on your shoe so they are parallel to an imaginary line drawn from tip of the toe to the base of the heal. If you feel any stress or strain, change the angle slightly to eliminate discomfort by trial and error.

Step 3: Adjust your saddle position

Adjust your saddle forards/backwards using a plumb line so your kneedcap is above the centre of the pedal in the 3 o'clock position.

Saddles can be horizontal with a slight tile up or down - start in a horizontal position and go on a few easy rides to find out what tilt is most comfortable for you.

Step 4: Set your suspension

Adjust your suspension with a shock pump. Follow the pressure guide on the back of your fork (or the instructions that came with your bike) and set your rear suspension to use 25% of the travel when sitting on the bike fully loaded.

Step 5: Get the right stem length

Your bike can be adjusted to your reach by adjusting the stem length. Bars that are too far or too close can lead to neck, shoulder, back and hand pain.

Change your stem so your handlebars are in the sightline of your front axle (when riding on the hoods for dropbars). Your stem could be too short if the axle is forward of the handlebar and too long if the axle is visible behind your bar.

Step 6: Check your handlebar height, width and angle

If you're finding a bike uncomfortable and may be experiencing lower back pain then your handlebar height may need adjusting. Handlebar height is achieved by adjusting the spacers above and below the handlebar. When looking at the bike on level ground the handlebar can be up to 10cm lower than the saddle. A good recreational rider may have their bar up to 5cm lower than the saddle. A flexible racer may be 10cm or more below the saddle.

Drop handlebars come in widths from 36 cm to 48cm. A good width of bar is one that is the same width of your shoulders - measure from the bony protrusion on the top of your shoulder blades from side to side. Narrower bars increase your aero shape and so many riders choose narrow bars.

Flat bar riders appreciate wider bars for extra control when riding technical ground but not so wide that trees and other obstacles arent an issue as trails cut through the trees.

Drop bars with a flare provide the best of both worlds. All day comfort for riding on the hoods and extra width when riding technical trails in the drops.

Tackling Tingling Hands and Numb Wrists: Optimising Saddle Angle for Pelvic Alignment

One common issue cyclists face is tingling hands and numb wrists, often stemming from improper saddle positioning. To overcome this, focus on adjusting the saddle angle. Tilt it downward to shift your pelvis backwards, aligning it with the bike's geometry. This simple tweak helps distribute your weight evenly and alleviates pressure on your hands and wrists during long rides.

Banishing Lower Back Pain: Finding the Right Reach and Saddle Angle

Lower back pain can put a damper on any ride. Achieving the correct reach and saddle angle is essential. Experiment with your bike's reach by adjusting the stem length or swapping it for a different size. Additionally, fine-tune the saddle angle to support your lower back properly. A slight tilt forward can work wonders, ensuring a comfortable riding position without straining your back muscles.

Easing Knee Pain: Mastering Cleat Position, Saddle Height, and Forward Lateral Adjustment

Knee pain can be a real blocker to epic rides. It is usually caused by improper cleat positioning, saddle height, or forward lateral adjustments. Ensure your cleats are positioned correctly to align with the natural angle of your feet. Experiment with saddle height; too high or too low can strain your knees. For added comfort, consider forward lateral adjustments to find the sweet spot that minimises stress on your knees during each pedal stroke.

Comfort for Your Bum: Saddle Break-In and Ideal Padding.

Saddle discomfort is a common woe among cyclists, especially during the initial break-in period. Wearing in your saddle gradually is essential; don't rush it. Additionally, invest in quality padding that suits your anatomy.

Alleviating Shoulder Pain: Dialling in the Bar Width

Shoulder pain can be an unwelcome companion on your cycling adventures, often caused by handlebars that are too wide or narrow. Find the sweet spot by adjusting the width of your handlebars. Aim for a comfortable position that aligns with your shoulder width, allowing for a natural, relaxed riding posture. This simple adjustment can make a significant difference in your overall comfort.

Preventing Flared Legs: Adjusting Saddle Height for Optimal Leg Extension

Flared legs can indicate that your saddle is too low, causing unnecessary strain on your knees and hips. Experiment with saddle height to achieve optimal leg extension during each pedal stroke. A proper saddle height ensures efficient power transfer and reduces the risk of discomfort and fatigue in your legs.

While it can feel like all this tweaking takes a lot of time, a well-fitted bike enhances your riding experience and contributes to your overall well-being as you go nice places and do good things - so we say it's time very well spent.